Brocade Communications Systems StoreFabric SN6500B User Manual page 1061

3. From the Available Traps list, select the trap for the down state of a product or interface.
4. Select a trap for the Selected Down Trap list and a trap for the Selected Up Trap list.
5. You can change the text associated with the selected trap by doing any of the following:
6. After limiting the list of available traps, expand the MIB folder to which the trap you want
7.
8. Click Next to advance to the Summary pane.
9. Click Finish to save your definition. The new pseudo event appears on the Pseudo Event list on
Brocade Network Advisor SAN User Manual
53-1002696-01
FIGURE 445
Events pane of the Add Pseudo Event dialog box
By default, all traps known to the Management application are included in the Available Traps
list, which is a list of all traps that are available based on the MIB and filter criteria.
You cannot select the same trap for up and down conditions. Move the traps from the Available
Traps list to the Selected Down Trap and Selected Up Trap lists using the right arrow button.
-
Click one of the following buttons:
•
MIB Information, if you want the default SNMP name for the traps to be displayed.
•
MIB Alias, if you want the aliases for the traps to be displayed.
-
Use the Trap Filter tool to limit the trap severity. To use this tool, click the Filter button to
display the Trap Filters dialog box.
belongs under the Available Traps list, or right-click to select that trap. Click the right arrow
button to move it to the Selected Traps list.
Select a trap for the up state of the condition.
NOTE
You must select a down and an up trap. You cannot select the same trap for the up and down
conditions.
the Pseudo Event dialog box.
32
Pseudo events
1013