Deleting A Zone; Duplicating A Zone - Brocade Communications Systems StoreFabric SN6500B User Manual

21
Zoning configuration

Deleting a zone

1. Select Configure > Zoning > Fabric.
2. Click the Zone DB tab if that tab is not automatically displayed.
3. Select a fabric from the Zoning Scope list.
4. Select one or more zones in the Zones list that you want to delete, then right-click and select
5. Click Yes to delete the selected zones.
6. Click OK or Apply to save your changes.

Duplicating a zone

When you duplicate a zone, you make a copy of it in the same zone database. The first time a zone
is duplicated, the duplicate is automatically given the name <zonelabel>_copy. On subsequent
duplications, a sequential number is assigned to the zone name, such as <zonelabel>_copy_1,
<zonelabel>_copy_2, and <zonelabel>_copy_3.
1. Select Configure > Zoning > Fabric.
2. Click the Zone DB tab if that tab is not automatically displayed.
3. Select a fabric from the Zoning Scope list.
4. Select one or more zones in the Zones list that you want to duplicate, then right-click and
722
Any zones or zone configurations you have changed are saved in the zone database.
The Zoning dialog box displays.
This identifies the target entity for all subsequent zoning actions and displays the zoning
database for the selected entity.
Delete.
A message displays asking you to confirm the deletion.
The message closes and the zone or zones are removed from the Zones list.
NOTE
If you delete something in error, click Cancel on the Zoning dialog box to exit without saving
changes. When you reopen the dialog box, the zone is restored.
Any zones or zone configurations you have changed are saved in the zone database.
The Zoning dialog box displays.
This identifies the target entity for all subsequent zoning actions and displays the zoning
database for the selected entity.
select Duplicate.
The duplicated zone or zones display in the Zones list.
Brocade Network Advisor SAN User Manual
53-1002696-01