Brocade Communications Systems StoreFabric SN6500B User Manual page 736

20
Rekeying all disk LUNs manually
FIGURE 323
4. Click Add.
5. Click Re-keying Details.
688
Encryption Target Disk LUNs dialog box
The Add Disk LUNs dialog box displays. This dialog box includes a table of all LUNs in the
storage device that are visible to the hosts.
The LUN Re-keying Details dialog box displays. The dialog box contains the following
information:
•
Key ID: The LUN key identifier.
•
Key ID State: The state of the LUN rekeying operation.
•
Encryption Algorithm: The algorithm of the LUN rekeying operation.
•
Re-key Session Number: The session number of the LUN rekeying operation.
•
Re-key Role: The role of the LUN rekeying operation.
•
Re-key State: The state of a manual LUN rekeying operation. Options are:
•
Read Phase
•
Write Phase
•
Pending
•
Disabled
•
Block Size: The block size used on the LUN.
•
Number of Blocks: The number of blocks written.
•
Current LBA: The Logical Block Address (LBA) of the block that is currently being written.
•
Re-key Completion: The status of the LUN rekeying operation's progress.
Brocade Network Advisor SAN User Manual
53-1002696-01