Configuring Storage Arrays - Brocade Communications Systems StoreFabric SN6500B User Manual

FIGURE 299
11. Click OK or Apply to apply the changes.

Configuring Storage Arrays

The Storage Array contains a list of storage ports that will be used later in the LUN centric view. You
must assign storage ports from the same storage array for multi-path I/O purposes. On the LUN
centric view, storage ports in the same storage array are used to get the associated CryptoTarget
containers and initiators from the database. Storage ports that are not assigned to any storage
array but are within the fabrics of the encryption group will be listed as a single target port on the
LUN centric view. Storage Arrays are configured using the Storage Port Mapping dialog box. You will
need to:
1. Configure target and zone initiator ports in the same zone in order for the target container to
2. Create CryptoTarget containers for each target port in the storage array from the Target
For more detailed information on creating a crypto target container, refer to the chapter describing
storage arrays in this administrator's guide.
Brocade Network Advisor SAN User Manual
53-1002696-01
Correcting an Encryption Mode Mismatch
When you correct a policy on a LUN, it is automatically selected for all paths to the selected
LUN. When you modify LUN policies, a Modify icon displays to identify the modified LUN entry.
come online and discover LUNs in the storage system.
Container dialog box. Add initiator ports to the container. You must create target containers for
those target ports in the configured storage arrays or unassigned target ports before mapping
any LUN on the LUN centric view. If you do not create the container, LUN discovery will not
function.
Adding target disk LUNs for encryption
20
655