San Ethernet Loss Events; Enabling San Ethernet Loss Events; Disabling San Ethernet Loss Events - Brocade Communications Systems StoreFabric SN6500B User Manual

SAN Ethernet loss events

An Ethernet event occurs when the Ethernet link between the Management Server and the
managed SAN device is lost. You can configure the application to enable events when the Ethernet
connection is lost.

Enabling SAN Ethernet loss events

The Options dialog box enables you to configure the Management application to generate an
Ethernet event after a device is offline for a specific period of time.
To enable Ethernet loss events, complete the following steps.
1. Select Server > Options.
FIGURE 24
2. Select SAN Ethernet Loss Events in the Category list.
3. Select the Enable events for ethernet loss check box.
4. Enter the Ethernet time out value (10 to 120 minutes).
5. Click Apply or OK to save your work.

Disabling SAN Ethernet loss events

To disable Ethernet loss events, complete the following steps.
1. Select Server > Options.
2. Select SAN Ethernet Loss Events in the Category list.
3. Clear the Enable events for ethernet loss check box.
4. Click Apply or OK to save your work.
Brocade Network Advisor SAN User Manual
53-1002696-01
The Options dialog box displays.
Options dialog box (SAN Ethernet Loss Event pane)
The Options dialog box displays.

SAN Ethernet loss events

5
87