Setting Fips Compliance - Brocade Communications Systems StoreFabric SN6500B User Manual

Setting FIPS compliance

1. From the KeySecure Management Console, select the Security tab, then select Advanced
FIGURE 206
2. Under FIPS Compliance, set FIPS Compliance to Yes.
Brocade Network Advisor SAN User Manual
53-1002696-01
Steps for connecting to a KMIP appliance (SafeNet KeySecure)
Security, > High Security.
The High Security Configuration page displays
KeySecure High Security Configuration page
This ensures that only TLS 1.0 connections are supported between the Fabric OS encryption
switch and the KeySecure.
(Figure 206).
20
575