The SNMP Trap Forwarding dialog box, shown in
Adding a trap destination
The Add Trap Destination dialog box allows you to configure destinations for forwarding SNMP
traps.
1. Select Monitor > SNMP Setup > Trap Forwarding.
2. Click the Enable trap forwarding check box.
3. Click Add in the Destinations area of the SNMP Trap Forwarding dialog box.
Brocade Network Advisor SAN User Manual
53-1002696-01
FIGURE 422
SNMP Trap Forwarding dialog box
The SNMP Trap Forwarding dialog box, shown in
The Add Trap Destination dialog box, shown in
Figure
422, displays.
Figure
422, displays.
Figure
423, displays.
32
SNMP traps
981