Brocade Communications Systems StoreFabric SN6500B User Manual page 173

Configuring an internal FTP server
To configure the internal FTP server settings, complete the following steps.
1. Select Server > Options.
2. Select FTP/SCP/SFTP in the Category list.
3. Select the Use built-in FTP/SCP/SFTP Server option to use the default built-in FTP server.
4. Select the Built-in FTP Server check box.
5. Change your password by entering a new password in the Password and Confirm Password
6. Click Test to test the FTP server.
7.
Brocade Network Advisor SAN User Manual
53-1002696-01
The Options dialog box displays.
The FTP/SCP/SFTP pane displays
FIGURE 41
Options dialog box (FTP/SCP/SFTP pane)
All active fields are mandatory. The default user name is admin. The full path to the built-in FTP
directory displays in the Root Directory field.
fields.
The default password is passw0rd (where 0 is a zero).
An "FTP Server running successfully" or an error message displays.
If you receive an error message, make sure your credentials are correct, the server is running,
the remote directory path exists, and you have the correct access permission; then try again.
Click Apply or OK to save your work.
Software Configuration
(Figure 41).
5
125