1. Select the AAA Settings tab
2. Select Radius Server from the Primary Authentication list.
3. Add or edit a Radius server by referring to
4. Rearrange the Radius servers in the table by selecting a server and click the Up or Down
5. Delete a Radius server by selecting the server and click Delete.
6. Test the established active connection with the Radius server by clicking Test.
7.
8. Set the fall back condition to secondary authentication by selecting one of the following
9. Set the authorization preference by selecting one of the following options from the
10. Click Apply to save the configuration.
11. Click Close to close the Server Management Console.
Brocade Network Advisor SAN User Manual
53-1002696-01
FIGURE 105
AAA Settings tab
button to move it.
Test attempts to contact the Radius server by issuing a ping command.
Set secondary authentication by selecting one of the following options from the Secondary
Authentication list:
•
Local Database
•
None
options from the Fail Over Option list:
•
Radius Servers Not Reachable
•
Radius Authentication Failed
Authorization Preference list:
•
Local Database
•
Primary Authentication Server
To display the authentication audit trail, refer to
trail"
on page 305.
(Figure
105).
"Configuring a Radius server"
"Displaying the client authentication audit
11
AAA Settings tab
on page 296.
295