Brocade Communications Systems StoreFabric SN6500B User Manual page 692

20
Configuring encryption storage targets
FIGURE 288
644
Select Hosts dialog box
The dialog box contains the following information:
•
Hosts in Fabric table: Lists the available hosts in the fabric.
•
Selected Hosts table: Lists the hosts that have been selected to access the target.
•
Port WWN: The world wide name of the host ports that are in the same fabric as the
encryption engine.
•
Node WWN: The world wide name of the host nodes that are in the same fabric as the
encryption engine.
•
Port Name: The user-assigned port name, if one exists; otherwise, the symbolic port name
from the device.
•
Port ID: The 24-bit Port ID of the host port.
•
VI Port WWN: The world wide name of the virtual initiator port.
•
VI Node WWN: The world wide name of the virtual initiator node.
•
Host Name: The name of the hosts that are in the same fabric as the encryption engine.
•
Port WWN text box: Type a world wide name for a host port.
NOTE
Note: You must enter the host node world wide name before clicking Add, to add the WWN
to the Selected Hosts table.
•
Node WWN text box: Type a world wide name for a host node.
NOTE
Note: You must also enter the host port world wide name before clicking Add to add the
node WWN to the Selected Hosts table.
•
Device Type: The device type indicated by the fabric's name service. The value is either
Initiator or Initiator + Target.
Brocade Network Advisor SAN User Manual
53-1002696-01