Creating A Client On Teka - Brocade Communications Systems StoreFabric SN6500B User Manual

Creating a client on TEKA

This step assumes the group brocade has been created by an administrator. If the group brocade
does not exist, you must log in to TEKA as officer, create the group, and assign the group to a
manager.
1. From the Encryption Center Devices table, select a switch that needs to have a TEKA Client,
2. Click Key Vault User Name.
FIGURE 201
3. Copy the user name in the User Name field.
4. Log in to the Thales management program as a manager who has been assigned to the
5. Select the Clients tab
FIGURE 202
6. Click the Add Client tab.
7.
8. Enter a password in the Password and Verify Password fields.
Brocade Network Advisor SAN User Manual
53-1002696-01
then select Properties.
The Key Vault User Information dialog box displays
TEKA Key Vault User Information
brocade group.
(Figure
TEKA Clients tab
Enter the user name from
Steps for connecting to a TEKA appliance
(Figure
202).
step 3 in the Name field.
201).
20
567