Brocade Communications Systems StoreFabric SN6500B User Manual page 169

3. Enter how often you want to check for state changes in the Check for state change every field.
4. Enter how often you want to check for state changes in the If no state change, Poll switch every
5. Click Apply or OK to save your work.
6. Click OK on the "changes take effect after application restart" message.
Brocade Network Advisor SAN User Manual
53-1002696-01
Valid values are from 1 through 600 seconds. You cannot enter a value lower than the default
minimum value.
Default minimum values are as follows:
•
Small (Professional): 60 seconds
•
Medium: 120 seconds
•
Large: 180 seconds
field.
Valid values are from 1 through 3,600 seconds. Default values are as follows:
•
Small (Professional): 120 seconds
•
Medium: 900 seconds
•
Large: 1800 seconds
NOTE
Changes to this option take effect after an application restart.
NOTE
You can only restart the server using the Server Management Console (Start > Programs >
Management_Application_Name 12.X.X > Server Management Console).
Software Configuration
5
121