Adding A Link Reset Threshold - Brocade Communications Systems StoreFabric SN6500B User Manual

8. Click OK to add the Invalid Words threshold to the table and close the Add Invalid Words
9. Click OK on the Port Fencing dialog box.

Adding a Link Reset threshold

NOTE
This threshold is only available for Fabric OS devices.
NOTE
This feature requires a Trial or Licensed version.
Use to block a port when the Link Reset violation type meets the Fabric OS switch threshold. For
default threshold values for Fabric OS devices, refer to Chapter 7 of the Fabric Watch
Administrator's Guide.
To add a Link Reset threshold, complete the following steps.
1. Select Monitor > Fabric Watch > Port Fencing.
2. Select Link Reset (Fabric OS only) from the Violation Type list.
3. Click Add.
4. Enter a name for the threshold in the Name field.
5. Select one of the following options:
6. Enter the number of link resets allowed for the threshold in the Threshold errors field.
Brocade Network Advisor SAN User Manual
53-1002696-01
•
Minute — the port is blocked as soon as the specified number of invalid words allowed is
reached within a minute.
•
Hour — the port is blocked as soon as the specified number of invalid words allowed is
reached within a hour.
•
Day — the port is blocked as soon as the specified number of invalid words allowed is
reached within a day.
Threshold dialog box.
To assign this threshold to fabrics, switches, or switch ports, refer to
page 821.
The Port Fencing dialog box displays.
The Add Link Reset Threshold dialog box displays.
FIGURE 370
Add Link Reset Threshold dialog box
•
Default — Uses device defaults. Go to
•
Custom — Uses your selections. Continue with
Adding thresholds
step 8.
step 6.
24
"Assigning thresholds" on
817