Restoring A Master Key From A Smart Card Set - Brocade Communications Systems StoreFabric SN6500B User Manual

FIGURE 316
4. Choose the active or alternate master key for restoration, as appropriate.
5. Select Key Vault as the Restore From location.
6. Enter the key ID of the master key that was backed up to the key vault.
7.
8. Click OK.

Restoring a master key from a smart card set

A card reader must be attached to the SAN Management application PC to complete this
procedure.
Use the following procedure to restore the master key from a set of smart cards.
1. Select Configure > Encryption from the menu task bar to display the Encryption Center
2. Select a group from the Encryption Center Devices table, then select Group > Security from the
3. Select Restore Master Key as the Master Key Action.
Brocade Network Advisor SAN User Manual
53-1002696-01
Select a Master Key to Restore (from key vault) dialog box
Enter the passphrase. The passphrase that was used to back up the master key must be used
to restore the master key.
dialog box (Refer to Figure 185
menu task bar.
The Encryption Group Properties dialog box displays with the Security tab selected.
The Restore Master Key for Encryption Group dialog box displays
on page 526).
20
Master keys
(Figure 317).
677