Determining Inactive Iscsi Devices; Determining Port Status; Viewing Port Optics - Brocade Communications Systems StoreFabric SN6500B User Manual

TABLE 51
Field
3. Click Close to close the dialog box.

Determining inactive iSCSI devices

For router-discovered iSCSI devices, you can view all of the inactive iSCSI devices in one list. To do
this, use the Ports Only view and then sort the devices by FC Address. The devices that have an FC
address of all zeros are inactive.
1. Select View All, Levels, and then Ports Only from the main window.
2. Use the scroll bar to view the columns to the right and locate the FC Address column in the
3. Click the column label to sort the column in ascending order, if needed.

Determining port status

You can determine whether a port is online or offline by looking at the Connectivity Map or the
Product List. On the Connectivity Map, right-click on the product whose ports you want to view and
select Show Ports.
To determine a port's status through the Product List, scroll down the Product List to the product
whose ports you want to see and click the added icon ( ).

Viewing port optics

NOTE
QSFP ports do not display in the Port Optics dialog box.
Enables you to view port optics for FC, TE, GE, and XGE ports.
To view port optics, complete the following steps.
1. Right-click the switch for which you want to view port optic information on the Connectivity Map
FIGURE 134
Brocade Network Advisor SAN User Manual
53-1002696-01
Port connection properties (Continued)
Auto VPWWN
User VPWWN
Ports Only list.
iSCSI ports that have an FC Address of all zeros are inactive. All others are active.
and select Port Optics (SFP).
The Port Optics (SFP) dialog box displays
Port Optics dialog box
Description
The automatically generated VPWWN.
The user-defined VPWWN.
(Figure 134).
12
Ports
365