Zone Configuration And Zoning Database Management - Brocade Communications Systems StoreFabric SN6500B Administrator's Manual

7.
8. When you are finished, click OK. The Traffic Isolations Zones window displays.
9. Click Apply to save the TI zone configuration.

Zone configuration and zoning database management

A zone configuration is a group of zones; zoning is enabled on a fabric by enabling a specific
configuration. You can specify members of a configuration using zone names.
Figure 27
zones, and zoning configuration. The database contains one zoning configuration, myconfig, which
contains two zones: Zone A and Zone B. The database also contains four aliases, which are
members of Zone A and Zone B. Zone A and Zone B also have additional members other than the
aliases.
FIGURE 27
Web Tools Administrator's Guide
53-1002756-01
NOTE
All switches in the fabric must be running Fabric OS v6.4.0 or later and all the ports in the TI
zones must be in the same failover mode.
Optional: Repeat steps 5 and 6 to add more elements to your TI zone.
displays a sample zoning database and the relationship between the zone aliases,
Zone Configuration: myconfig
Zone A
Alias 1
WWN 1; WWN 2; WWN 3
Other Elements
<domain, portarea>
Zone B
Alias 3
WWN 5
Other Elements
WWW 9
Sample zoning database
Zone configuration and zoning database management
Alias 2
WWN 4; <domain, portarea>
Alias 4
WWW 5; WWN 6; WWN7
8
115