Removing A Trap Recipient From One Or More Switches; Snmp Trap Forwarding - Brocade Communications Systems StoreFabric SN6500B User Manual

32
SNMP traps
5. Select the fabric or switches from the Available list and click the right arrow button to move it to
6. If the selected product is a SAN or Network OS device, select a severity from the Severity list.
7.
8. Click OK.

Removing a trap recipient from one or more switches

1. Select Monitor > SNMP Setup > Product Trap Recipients.
2. Click Remove from the Action list.
3. Enter the IP address of the SNMP trap port (the recipient server) in the Recipient IP Address
4. Select the fabric or switches from the Available list.
5. Click OK.

SNMP trap forwarding

The SNMP Trap Forwarding dialog box allows the Management application to forward received
SNMP traps to product trap recipients.
You can use the SNMP Trap Forwarding feature to set up filters to determine which traps will be
forwarded. The filters can be one of the following:
•
•
•
•
Perform the following step to forward SNMP traps.
Select Monitor > SNMP Setup > Trap Forwarding.
980
the Selected list. You can select multiple products.
NOTE
For IP products and product groups, only switches are available to select.
Severity levels can be one of the following: None, Critical, Error, Warning, Info, or Debug. The
Severity list is disabled for IP products. None is the default.
Click the View Recipients button to list the recipients that correspond to a selected fabric or
product from the Available list.
The Trap Recipients - Fabric dialog box or the Trap Recipients - IP address dialog box
(depending on which product you selected) displays a list of configured recipients.
The Management application registers the recipient IP address as an SNMP trap recipient. The
SNMP version and credentials from the SNMP profile (for example, SNMP v3) are registered.
The SNMP Trap Recipients dialog box, shown in
field.
NOTE
For IP products, only switches are available to select.
The Management application removes the recipient from the managed switches.
Severity of the trap
Available products type
Trap type
Message types (application messages or pseudo events)
Figure 421, displays.
Brocade Network Advisor SAN User Manual
53-1002696-01