20
Master keys
FIGURE 314
4. Select A Recovery Set of Smart Cards as the Backup Destination.
5. Enter the recovery card set size.
6. Insert the first blank card and wait for the card serial number to appear.
7.
8. Enter the mandatory last name and first name of the person to whom the card is assigned.
9. Enter a Card Password.
10. Re-enter the password for verification.
11. Record and store the password in a secure location.
12. Click Write Card.
13. Repeat
14. After the last card is written, click OK in the Master Key Backup dialog box to finish the
674
Backup Destination (to smart cards) dialog box
Run the additional cards through the reader that are needed for the set. As you read each card,
the card ID displays in the Card Serial# field. Be sure to wait for the ID to appear.
You are prompted to insert the next card, up to the number of cards specified in
step 6
through
step 12
operation.
for each card in the set.
step
Brocade Network Advisor SAN User Manual
53-1002696-01
5.