Client Export Port Settings - Brocade Communications Systems StoreFabric SN6500B User Manual

Enabling and disabling certificate validation
The Management application server only validates the certifying authority and the date in the
certificate.
Certificate validation requires HTTPS connections between the server and the switches. To
configure product communication to HTTPS, refer to
page 122.
1. Select Server > Options.
2. Select Certificates to in the Category list.
3. Select the Enable certificate validation check box.
4. Click Apply or OK to save your work.

Client export port settings

You can configure a port for communication between the client and server.
Configuring the client export port
To configure client export port settings, complete the following steps.
1. Select Server > Options.
2. Select Client Export Port to assign a communications port between the client and server in the
3. Enter the client export port number to set a fixed port number for the client in the Client Export
Brocade Network Advisor SAN User Manual
53-1002696-01
The Options dialog box displays.
The Certificates pane displays.
Clear the check box to disable certificate validation.
The Options dialog box displays.
Category list.
The Client Export Port pane displays
FIGURE 37
Options dialog box (Client Export Port pane)
Port field.
The current port number displays in the Current Port # field.
The default port number (55555) displays in the Default Port # field.
Software Configuration
"Product communication settings"
(Figure 37).
5
on
113