Duplicating A Deployment Configuration; Deleting A Deployment Configuration; Deploying A Configuration - Brocade Communications Systems StoreFabric SN6500B User Manual

Duplicating a deployment configuration

1. Select Configure > Deployment.
2. Select a deployment configuration in the Saved or Scheduled tab.
3. Click Duplicate.
4. Update the dialog box with any information you want to change.

Deleting a deployment configuration

1. Select Configure > Deployment.
2. Select a deployment configuration in the Saved or Scheduled tab.
3. Click Delete.
4. Click Yes in the confirmation dialog.

Deploying a configuration

1. Select Configure > Deployment.
2. Select a deployment configuration in the Saved or Scheduled tab.
3. Click Deploy.
4. Click Start.
Brocade Network Advisor SAN User Manual
53-1002696-01
The Deployment dialog box displays.
NOTE
VLAN configurations and policy-based routing configurations cannot be duplicated.
A dialog box specific to the type of deployment displays. This is the same dialog box that was
used when the original deployment was created.
A copy of the deployment configuration is created with the name "originalName copyn". For
example, if the original name is "test", the new name is "test copy1". If you duplicate "test"
again, the name of the second duplicate is "test copy2".
The Deployment dialog box displays.
The deployment configuration is deleted and removed from the Deployment dialog box.
If the deployment configuration is already in progress, it is not deleted.
The Deployment dialog box displays.
The Deployment Status dialog box displays.
The selected configuration is deployed.
You cannot deploy configurations that are already in progress.

Duplicating a deployment configuration

27
877