Restoring A Switch Configuration For A Selected Device - Brocade Communications Systems StoreFabric SN6500B User Manual

3. Click the right arrow to move the selected switches to the Selected Switches table.
4. Click OK.
5. (Professional only) Browse to the location where you want to save the switch configuration.
6. (Professional only) Click Save Configuration.

Restoring a switch configuration for a selected device

The Restore Switch Configuration dialog box enables you to download a previously saved switch
configuration to a selected device.
To restore a switch configuration, complete the following steps.
1. Right-click a device in the Product List or the Connectivity Map, and select Configuration >
2. Select the switch configuration you want to download from the Saved Switch Configurations
3. Click OK.
Brocade Network Advisor SAN User Manual
53-1002696-01
Configuration files from the selected switches are saved to the repository.
Configuration files from the selected switches are saved to the selected location. You can use
this file to restore the saved configuration through the device's Element Manager.
Restore.
The Restore Switch Configuration dialog box displays.
FIGURE 122
Restore Switch Configuration dialog box
table.
The configuration is downloaded to the device. If necessary, the restoration process prompts
you to disable and reboot the device before the configuration begins. This lets you determine
whether the configuration backup should be performed immediately or at a later time.
When you restore a switch configuration on a Virtual Fabrics-configured chassis, the
configuration data for the logical switches is downloaded to the switch as configured in the file.
When you restore a switch configuration on a logical switch, only the selected logical switch
configuration data is downloaded to the switch.
Configuration repository management
12
329