Brocade Communications Systems StoreFabric SN6500B User Manual page 1024

32
Defining filters
4. Select which product type you are defining (SAN, IP, or Hosts) and click the appropriate tab.
5. Select the Events Description check box and enter a description of the event in the field.
6. Select the Allow Products check box to control whether or not all products are always displayed.
7.
8. Select at least one severity for each event. Severity options include Emergency, Alert, Critical,
NOTE
If you delete event actions that are part of the filtering criteria, they will not display in the Master Log,
which displays in the lower left area of the main window, and lists all events and alerts that have
occurred on the managed networks.
976
FIGURE 419 Define Filter dialog box
•
When selected (the default), all products, even newly-added products, are added to the
Selected Products to be displayed list.
•
If the check box is cleared, only the products listed in the Selected Products to be
displayed list are shown in the Master Log and all newly-added products are added to the
Available Products list.
Select one or more event categories from the Available Event Category list and click the right
arrow button to move it to the Selected Event Category and Severity to be displayed list. You
can move any or all event categories.
Error, Warning, Notice, Debug, Info, and Unknown.
Brocade Network Advisor SAN User Manual
53-1002696-01