8
Performance Dashboard monitors
•
Top Port Errors monitor
The Top Port Errors monitor
table.
FIGURE 70
The Top Port Errors monitor includes the following data:
•
•
•
•
•
•
•
•
•
•
•
To customize the monitor to display data by a selected time frame as well as customize the display
options, refer to
Accessing additional data from the Top Port Errors monitor
•
210
Double-click a row to navigate to the SAN Historical Graphs/Tables dialog box. For more
information, refer to
"Performance Data"
(Figure
Top Port Errors monitor
Severity icon/monitor title — The worst severity of the data shown next to the monitor title.
Port — The port affected by this monitor.
RX Errors/sec — The top ports with receive errors in seconds.
TX Errors/sec — The top ports with transmit errors in seconds.
Product — The product affected by this monitor per second.
Type — The type of port (for example, U-Port).
Identifier — The port identifier.
Port Number— The port number.
State — The port state (for example, Enabled).
Status — The port status (for example, Up).
Refreshed — The refresh time and selected time range for the monitor.
"Editing a preconfigured performance monitor"
Right-click a row in the monitor to access the shortcut menu available for the associated
device. For more information about shortcut menus, refer to
page 1061.
on page 895.
70) displays the top ports with receive and transmit errors in a
on page 220.
"Application menus"
on
Brocade Network Advisor SAN User Manual
53-1002696-01