Configuring Event Action E-Mail Settings - Brocade Communications Systems StoreFabric SN6500B User Manual

32
Event action definitions
3. To view all acknowledged special events, click the Show Acknowledged check box in the upper

Configuring event action e-mail settings

The Action Group - E-Mail Settings pane of the Add Event Action dialog box, shown in
allows you to select e-mail recipients from a list, add new e-mail recipients, and compose e-mail
messages.
1. (Optional) Select the Management application user to whom the e-mail message will be sent
2. Add additional e-mail recipient addresses in the Other Recipients field. Separate multiple
3. If you want the e-mail message for the alert to display a description on the subject line, enter
1006
right corner of the dialog box. This check box is disabled by default.
The acknowledged special events display, sorted by the last event server time.
FIGURE 440
Action Group - E-Mail Settings pane of the Add Event Action dialog box
from the Available Recipients list, and click the right arrow button to move the recipient to the
Selected Recipients list.
NOTE
Make sure the user you select has an e-mail address defined in a user account.
e-mail addresses with a semicolon. At least one e-mail address must be specified by either
selecting an available recipient from the list
the text in the Subject Line field.
NOTE
You can create a prefix that is included in the subject line of every e-mail alert that the
Management application sends. The prefix is defined in the configuration.properties file. The
prefix plus the text entered in this field cannot exceed 255 characters.
(step 1) or entering an e-mail recipient.
Brocade Network Advisor SAN User Manual
Figure 440,
53-1002696-01