Brocade Communications Systems StoreFabric SN6500B User Manual page 747

Brocade Network Advisor SAN User Manual
53-1002696-01
When the first encryption engine comes back online, the encryption group's failback
setting determines whether the first encryption engine automatically resumes encrypting
and decrypting traffic to its encryption targets. In manual mode, the second encryption
engine continues handling the traffic until you manually invoke failback using the CLI, or
until the second encryption engine fails.
•
Key Vault Type: Options are:
•
RSA Data Protection Manager (DPM): If an encryption group contains mixed firmware
nodes, the Encryption Group Properties Key Vault Type name is based on the firmware
version of the group leader. For example, If a switch is running Fabric OS 7.1.0 or later,
the Key Vault Type is displayed as "RSA Data Protection Manager (DPM)."If a switch is
running a Fabric OS version prior to v7.1.0, Key Vault Type is displayed as "RSA Key
Manager (RKM)".
•
NetApp Lifetime Key Manager (LKM): The NetApp Key Vault Type name is shown as
NetApp Lifetime Key Manager (LKM) for both NetApp Lifetime Key Manager (LKM) and
SafeNet KeySecure for Key Management (SSKM) Key Vault Types.
•
HP Secure Key Manager (SKM): The HP Key Vault Type name is shown as HP Secure
Key Manager (SKM) for both SKM and Enterprise Secure Key Management (ESKM)
Key Vault Types.
•
Thales e-Security keyAuthority (TEKA): If an encryption group contains mixed firmware
nodes, the Encryption Group Properties Key Vault Type name is based on the firmware
version of the group leader. For example, If a switch is running Fabric OS 7.1.0 or later,
the Key Vault Type is displayed as "Thales e-Security keyAuthority (TEKA)."If a switch is
running a Fabric OS version prior to v7.1.0, Key Vault Type is displayed as "Thales Key
Manager (TEMS)".
•
Tivoli Key Lifetime Manager (TKLM)
•
Key Management Interoperability Protocol (KMIP): Any KMIP-compliant server can be
registered as a key vault on the Fabric OS encryption switch after setting the key vault
type to KMIP.
Currently, only KMIP with SafeNet KeySecure for key management (SSKM) native
hosting LKM is supported.
•
REPL Support: (For DPM key vault only.) Identifies if the remote replication LUN support is
enabled or disabled. You can change the current setting by clicking on the field and
selecting the desired state.
•
Primary Key Vault IP Address: The IP address of the primary key vault, either IPv4 or host
name.
•
Primary Key Vault Connection Status: The status of the primary key vault link. In an
operating environment, the status should be Connected. Other options are:
•
Unknown/Busy
•
Not configured
•
Not responding
•
Failed authentication
•
Backup Key Vault IP Address: (Optional.) The IP address of the backup key vault. This field
can be left blank.
Viewing and editing encryption group properties
20
699