Brocade Communications Systems StoreFabric SN6500B User Manual page 139

7.
FIGURE 27
•
•
•
•
•
•
•
•
•
•
•
•
•
Brocade Network Advisor SAN User Manual
53-1002696-01
Add connection properties you want to display on flyover by selecting the Connection tab
(Figure 27) and completing the following steps.
Options dialog box (Flyovers pane, Connection tab)
a. Select the type from the Type list, if necessary.
protocol
Depending on which protocol you select, some properties may not be available for all
protocols.
b. Select each property you want to display in the connection flyover from the Available
Properties table.
Depending on which protocol you select, some of the following properties may not be
available for all protocols:
FC (default)
Active FC4 Types
Address
Attached Port#
Blocked Configuration
Class of Service
Device Type
Fabric
FC Address
IP Address
Master Port #
Max Frame Size (bytes)
Name
Name (port)
•
Node WWN
•
Operational State
•
OS Device Name
•
Port #
•
Port Blocked Reason
•
Port State
•
Port Type
•
Port WWN
•
Speed Configured (Gbps)
•
Speed Supported (Gbps)
•
Symbolic Name
•
Supported FC4 Types
•
Zone Alias
5
Flyover settings
91