Top Port Crc Errors Monitor - Brocade Communications Systems StoreFabric SN6500B User Manual

8
Performance Dashboard monitors
•

Top Port CRC Errors monitor

The Top Port CRC Errors monitor
redundancy check (CRC) errors in a table.
FIGURE 68
The Top Port CRC Errors monitor includes the following data:
•
•
•
•
•
•
•
•
•
•
To customize the monitor to display data by a selected time frame as well as customize the display
options, refer to
Accessing additional data from the Top Port CRC Errors monitor
•
208
Double-click a row to navigate to the SAN Historical Graphs/Tables dialog box. For more
information, refer to "Performance Data"
Top Port CRC Errors monitor
Severity icon/monitor title— The worst severity of the data shown next to the monitor title.
Port — The port affected by this monitor.
CRC Errors/sec — The top ports with frames that contain cyclic redundancy check (CRC) errors
in seconds.
Product — The product affected by this monitor.
Type — The type of port (for example, U-Port).
Identifier — The port identifier.
Port Number— The port number.
State — The port state (for example, Enabled).
Status — The port status (for example, Up).
Refreshed — The refresh time and selected time range for the monitor.
"Editing a preconfigured performance monitor"
Right-click a row in the monitor to access the shortcut menu available for the associated
device. For more information about shortcut menus, refer to
page 1071.
on page 895.
(Figure 68) displays the top ports with frames that contain cyclic
on page 220.
"SAN shortcut menus"
Brocade Network Advisor SAN User Manual
53-1002696-01
on