Brocade Communications Systems StoreFabric SN6500B User Manual page 1057

2. Click the Import Snort® Rule button.
3. Enter the complete path of the Snort rule file located on the Syslog server.
4. Click OK to import the Snort rules.
5. While still in the Add Event Action dialog box, continue to click Next until you advance to the
6. Select the Deploy CLI Configuration check box and click Configure if you want to deploy a
7.
8. Continue to advance through the Add Event Action dialog box. The Summary pane of the Edit
9. Review your entries and take one of the following actions:
Brocade Network Advisor SAN User Manual
53-1002696-01
The Import Snort® Rule File dialog box displays, as shown in
FIGURE 442 Import Snort® Rule File dialog box
Action Group - Actions pane.
configuration from CLI Configuration Manager to products if the policy criteria have been met.
You can only deploy a CLI configuration for IP products.
NOTE
If the CLI configuration you chose from CLI Configuration Manager contains a non-Brocade
product as a target, the configuration will not be deployed to the non-Brocade product.
Select one of the following existing CLI configuration parameter sources from the Parameter
list:
-
Source IP — The source IP address of the attack.
-
Source Port — The source port of the attack.
-
Destination IP — The destination IP address of the attack.
-
Destination Port — The destination port of the attack.
Event Action dialog box displays an overview of the e-mail configuration you are creating.
-
Click Finish to approve the configuration.
-
Click Previous to return to the Action Group - E-Mail Settings pane of the dialog box.
-
Click Cancel to cancel the operation.
Event action definitions
Figure 442.
32
1009