31
Viewing existing policy monitors
Viewing existing policy monitors
To view existing policy monitors, complete the following steps.
1. Select Monitor > Policy Monitor
2. Review the policy monitor details:
3. To add a policy monitor, click Add (refer to
4. To edit the selected policy monitor, click Edit (refer to
5. To delete the selected policy monitor, click Delete (refer to
6. To run the selected policy and view the report, click Run (refer to
958
The Policy Monitor dialog box displays.
FIGURE 412
Policy Monitor dialog box
•
Name — The user-defined name of the policy.
•
Description — A description of the policy.
•
Alert — Select to receive e-mail alerts and have the policy monitor status icon display in the
Status bar when the monitor fails or partially fails.
•
Frequency — The frequency (one time, hourly, daily, weekly, or monthly) at which the policy
is scheduled.
•
Next Run — The time the policy will run again.
•
Last Run — The time the policy ran last.
•
Result — The result of last policy monitor run. There are four possible results: Passed,
Partially Failed, Failed, and Not Applicable.
•
Acknowledged — Whether the policy is acknowledged or not. Select the check box to
acknowledge the policy. Disabled when the associated Alert check box is cleared.
page 967).
page 967).
(Figure
412).
"Adding a policy monitor"
"Editing a policy monitor"
Brocade Network Advisor SAN User Manual
on page 959).
on page 966).
"Deleting a policy monitor"
"Running a policy monitor"
53-1002696-01
on
on