Adding Targets To A User-Defined Performance Monitor - Brocade Communications Systems StoreFabric SN6500B User Manual

13. (Time series monitors only) Remove targets from the monitor by selecting one or more targets
14. Click OK on the Add Performance Dashboard Monitor dialog box.
15. Click OK on the Customize Dashboard dialog box.
Accessing additional data from user-defined product performance monitors
•
•
•

Adding targets to a user-defined performance monitor

You can only add targets for Time Series monitors.
1. Select Monitor > Performance > Dashboard.
2. Click the Customize Dashboard icon.
3. Click the Performance tab.
4. Click Add.
5. Select Time Series from the Monitor Type - Product or Port area.
6. Select the port measure for the monitor in the Measure area
7.
8. Click Add beneath the Targets table.
Brocade Network Advisor SAN User Manual
53-1002696-01
in the Targets list and clicking Remove.
The Customize Dashboard dialog box displays with the new monitor in the Performance
Monitors list.
The Performance Dashboard dialog box displays with the new monitors at the bottom of the
dashboard.
In a Distribution monitor, double-click a percentage range to navigate to the Measure_Type
Distribution Data Details dialog box. For more information, refer to
distribution data details" on page 232 or
In a Top N or Bottom N product monitor, double-click a row or right-click a row and select Show
Graph/Table to navigate to the Historical Graphs/Tables dialog box for the selected measures.
For more information, refer to
Right-click a row in the monitor to access the shortcut menu available for the associated
device. For more information about shortcut menus, refer to
page 1061.
The Performance Dashboard displays in a new window.
The Customize Dashboard dialog box displays.
The Add Performance Dashboard Monitor dialog box displays.
Display data for a specific duration from the Duration options.
The Performance Dashboard Monitor Targets dialog box displays.
Depending on the type of measure you select, you can add SAN products/portsand FCIP
tunnels to the list of targets.
If you selected SAN port measure, continue with
If you selected a FC IP port measure, go to
User-defined performance monitors
"Viewing port distribution data details"
"Performance Data" on page 895.
step 9.
step 12.
"Viewing product
on page 233.
"Application menus" on
8
229