Enabling A Dcb Port Or Lag; Deleting A Lag - Brocade Communications Systems StoreFabric SN6500B User Manual

16
DCB Configuration
8. Click Start on the Deployment Status dialog box to save the changes to the selected LAG or
9. Click Close to close the Deployment Status dialog box.

Enabling a DCB port or LAG

If you select multiple switches or multiple ports and LAGs from two or more switches, both the
Enable button and the Disable button are disabled.
1. Select Configure > DCB.
2. Select one or more DCB ports or LAGs (which can span multiple switches) that you want to
3. Click Enable.
4. Click Start on the Confirmation and Status dialog box to save the changes to the selected ports
5. Click Close to close the Confirmation and Status dialog box.

Deleting a LAG

You can only delete a link aggregation group (LAG) that is selected from a single switch. If you select
multiple switches or multiple ports from two or more switches, the Delete button is disabled.
1. Select Configure > DCB.
2. Select one or more LAGs (that can span multiple switches) that you want to delete from the
3. Click Delete.
4. Click Start on the Confirmation and Status dialog box to save the changes to the DCB switches.
5. Click Close to close the Confirmation and Status dialog box.
454
LAGs.
NOTE
If the primary or secondary IP address already exists on another interface, an error message
displays in the Status area.
The DCB Configuration dialog box displays, showing the status of all DCB-related hardware and
functions.
enable.
NOTE
All selected LAGs must be in the same state (enabled or disabled); otherwise, both the Enable
and Disable buttons are disabled.
The Confirmation and Status dialog box launches with the selected ports or LAGs.
or LAGs.
The selected DCB ports or LAGs are enabled in the DCB Configuration dialog box.
The DCB Configuration dialog box displays, showing the status of all DCB-related hardware and
functions.
Products/Ports list.
The Confirmation and Status dialog box launches with the selected LAGs.
The selected LAGs are deleted in the DCB Configuration dialog box.
Brocade Network Advisor SAN User Manual
53-1002696-01