Creating A Cluster - Brocade Communications Systems StoreFabric SN6500B User Manual

20
Steps for connecting to a KMIP appliance (SafeNet KeySecure)

Creating a cluster

1. From the KeySecure Management Console, select the Device tab, then select Device
FIGURE 217
2. Under Create Cluster, enter a user-defined password in the fields provided, then click Create.
3. Verify the cluster status is shown as Active.
582
Configuration > Cluster.
The Cluster Configuration page displays
KeySecure Cluster Configuration page
The Cluster Configuration page refreshes; the new cluster information is listed in the Cluster
Members table (Figure 218).
(Figure 217).
Brocade Network Advisor SAN User Manual
53-1002696-01