Editing An Fcoe Login Group - Brocade Communications Systems StoreFabric SN6500B User Manual

Editing an FCoE login group

Complete the following steps to edit the name of a login group. You can manually add ports by
entering the world wide name (WWN) or select available managed CNAs from all discovered hosts.
Only directly-connected devices are supported.
1. Select Configure > FCoE from the menu bar.
2. Select a group from the Login Groups list and click Edit.
3. Perform one of the following editing tasks:
4. Select available members from the Products/Ports list and click the right arrow button to move
5. Click OK.
6. Review the changes carefully before you accept them.
Brocade Network Advisor SAN User Manual
53-1002696-01
The Edit Login Group dialog box displays, as shown in
FIGURE 170
Edit Login Group dialog box
NOTE
The Fabric field and the Switch field are read-only fields.
•
Rename the login group by entering the new name into the Name field. The Allow All option
must be selected to rename the login group.
•
Select one of the following options to add or remove login members into the Available
Members list. The Allow Specific option must be selected to add or remove login members.
•
Port WWN—Click to enter the world wide name (WWN) of the port to associate with the
selected switch. The member port WWN text field allows a maximum of 16 digits.
•
Managed CNAs—Click to show a list of products and ports which can be selected as
login group members.
the available members to the Selected Members list.
The FCoE Login Group Confirmation and Status dialog displays.
FCoE login groups
Figure 155.
16
483