Viewing Disk Lun Rekeying Details - Brocade Communications Systems StoreFabric SN6500B User Manual

.
FIGURE 322

Viewing disk LUN rekeying details

You can view details related to the rekeying of a selected target disk LUN from the LUN Re-keying
Details dialog box.
1. Select Configure > Encryption from the menu task bar to display the Encryption Center
2. Select a group, switch, or engine from the Encryption Center Devices table, then select
3. Select a Target storage device, then select Group/Switch/Engine > Disk LUNs.
Brocade Network Advisor SAN User Manual
53-1002696-01
Pending manual rekey operations
dialog box (Refer to Figure 185
Group/Switch/Engine > Targets, or right-click the group, switch, or engine and select Targets.
NOTE
You can also select a group, switch, or engine from the Encryption Center Devices table, then
click the Targets icon.
The Encryption Targets dialog box displays.
The Encryption Target Disk LUNs dialog box displays
must add LUNs manually.
Rekeying all disk LUNs manually
on page 526).
(Figure 323). Initially the list is empty. You
20
687