Brocade Communications Systems StoreFabric SN6500B User Manual page 907

Brocade network advisor san user manual v12.0.0 (53-1002696-01, march 2013)
Hide thumbs Also See for StoreFabric SN6500B:
Table of Contents

Advertisement

3. Enter a VLAN ID in the Configure VLAN field.
4. Click the Load Products button. Products that already have the entered VLAN IDs configured on
5. Under the Available Products list, select one or more products to which the VLAN will be
6. Click the right arrow button to move your selection to the Selected Products list.
7.
8. In the Available Ports list, select the interfaces that you want to assign to a VLAN.
9. In the Select VLANs list, select the VLAN you want to assign to the selected interfaces. The list
Brocade Network Advisor SAN User Manual
53-1002696-01
FIGURE 384
Add VLAN dialog box - Ports tab
You can enter more than one ID, separating individual IDs with a comma (for example, 10, 45,
79, 30). For DCB products, the VLAN ID range is from 1 through 3583.
them are automatically moved to the Selected Products list. The Load Products button is
disabled by default.
assigned. You can also use the Search tool to find ports.
Expand the folder for a selected product in the Available Ports list to display all the interfaces
or trunk groups on the product that can be added to the VLAN.
The Selected Ports list displays the list of configured VLANs. Initially, these VLANs contain no
ports. If no ports or trunk groups are selected, an empty VLAN is created on the products (DCB
products only).
If you place your pointer over an interface in the Available Ports list, a tool tip appears, showing
the VLAN assignment of the interface. You can also use the Search tool bar to search for ports
under the Available Ports list, then assign the ports found to the VLAN.
includes the default VLAN (VLAN1) and the VLAN or VLANs you are currently creating. You can
assign one or more VLANs to the selected ports.
In the Selected Ports list, each VLAN node is shown as Tagged, Untagged, or Dual Mode. If a
port is already tagged in one VLAN, it can be marked as Tagged in other VLANs. The port can
also be marked as Untagged in other VLANs, which changes its mode to Dual Mode.
26
Port VLANs
859

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Brocade network advisor 12.0.0

Table of Contents