Host Adapter Discovery; Vm Manager; Adding A Vm Manager - Brocade Communications Systems StoreFabric SN6500B User Manual

15

Host adapter discovery

Host adapter discovery

The Management application enables you to discover individual hosts, import a group of hosts from
a CSV file, or import host names from discovered fabrics. The maximum number of host discovery
requests that can be accepted is 1000. Host discovery requires HCM Agent 2.0 or later.
ESXi host adapter discovery requires the Brocade HBA CIM provider to be installed on the ESXi
host.
NOTE
Pure Fabric discovery alone shows adapters behind Access Gateway and all adapter ports as virtual.
When you discover an adapter and ports using host discovery, the adapter and all its ports are
shown as physical.
Instructions for discovering hosts are detailed in

VM Manager

A vCenter server can be discovered by adding a VM Manager to the Management application. Refer
to Chapter 4, "Discovery"

Adding a VM Manager

1. Click Add on the Discover VM Managers dialog box.
2. Enter the IP address or host name of the VM Manager (VMM) into the Network Address field.
3. Enter the VMM server port number into the Port field. The valid port number range is from 0
4. Enter the user ID into the User ID field to identify the user of the VMM. The maximum number
5. Enter the password into the Password field. The maximum number of supported characters is
6. Enable or disable the vSphere client plug-in registration. If you enable this plug-in, events are
408
for information about discovering VM Managers.
The Add VM Manager dialog box displays, as shown in
FIGURE 138
Add VM Manager dialog box
The maximum number of supported characters is 256.
through 65536. The default port number is 443.
of supported characters is 64.
64.
forwarded from the Management application to the vCenter server.
Chapter 4, "Discovery".
Figure 138.
Brocade Network Advisor SAN User Manual
53-1002696-01