Editing Event Actions - Brocade Communications Systems StoreFabric SN6500B User Manual

4. Indicate how often the policy is to be reset. You can choose one of the following options:
5. In the Message field, enter the message that will be displayed in the Event Log for the
6. From the Severity list, select the severity you want to assign to the generated event.
7.
8. The Actions Group - Actions pane of the Add Event Action dialog box displays. Proceed to

Editing event actions

The Action Group - Actions pane of the Edit Event Action dialog box, shown in
what action the Management application takes when the criteria are met.
Brocade Network Advisor SAN User Manual
53-1002696-01
•
Reset immediately - Repeats the policy as soon as the specified action has been applied.
•
Wait until ____ seconds or minutes - If this parameter is selected, the policy will not be
applied to the product for the specified duration of time. Enter the duration in minutes or
hours. You can suppress the policy just for the events specified in the policy or for any
event that occurs on the product. Once the duration expires, the policy can be repeated.
generated event. This entry replaces the default message that is displayed for a trap. Also, this
message is used as the Event Action message and is displayed in single quotes on the Event
Log report.
Click Next.
"Editing event actions".
FIGURE 438 Action Group - Actions pane of the Edit Event Action dialog box
Event action definitions
Figure 438, defines
32
1003