Brocade Communications Systems StoreFabric SN6500B User Manual page 368

11
SMI Agent Configuration Tool
Configuring the SMI Agent port number
To configure the SMI Agent port number, complete the following steps.
1. Click the CIMOM tab.
2. Select or clear the Enable SSL check box, to enable or disable SSL for the SMI Agent.
3. Enter the SMI Agent port number in the SMI Agent Port # field.
4. Click Apply.
5. Click Close to close the SMIA Configuration Tool dialog box.
320
FIGURE 118
CIMOM tab
NOTE
Disabling SSL will disable Indication and Client Mutual Authentication.
If the check box is checked (default), SSL is enabled. If the check box is clear, SSL is disabled.
This port number must be within the range of 1 through 65535. Defaults are 5989 with SSL
enabled and 5988 with SSL disabled.
NOTE
Changes on this tab take effect after the next CIMOM server restart.
NOTE
You can only restart the server using the Server Management Console (Start > Programs >
Management_Application_Name 12.X.X > Server Management Console).
If you disabled SSL, a confirmation message displays. Click Yes to continue.
Brocade Network Advisor SAN User Manual
53-1002696-01