6. Copy the artifact from the extracted folder to the source folder in the
7.
8. Go to the Install_Home/conf directory.
9. Open the version.properties file in a text editor.
10. Change the patch version (patch.version) value to the reverted patch (for example, if you are
11. Go to the Install_Home/patch-backup/conf directory.
12. Copy the patch.conf file in this directory to the Install_Home/conf directory.
13. Start all services by completing the following steps.
Brocade Network Advisor SAN User Manual
53-1002696-01
Install_Home/patch-backup directory.
Repeat step 5 and 6 for all artifacts listed in the restore.xml folder.
reverting from patch F to patch C then
If the previous version is the initial version (no patches), change the patch version value to
none (for example,
patch.version = None
If the previous version is the initial version (no patches), delete the patch.conf file in the
Install_Home/conf directory.
a. Launch the Server Console.
b. Click the Services tab.
c.
Click Start to start all services.
Uninstalling a patch
).
patch.version = c
).
3
37