Editing A Policy Monitor - Brocade Communications Systems StoreFabric SN6500B User Manual

31

Editing a policy monitor

Configuring a weekly policy monitor schedule
To configure a weekly schedule, complete the following steps.
1. Select Weekly from the Frequency list.
2. Select the time of day you want deployment to run from the Time (hh:mm) lists.
3. Select the day you want deployment to run from the Day of the Week list.
4. Click OK on the Schedule Properties dialog box.
Configuring a monthly policy monitor schedule
To configure a monthly schedule, complete the following steps.
1. Select Monthly from the Frequency list.
2. Select the time of day you want deployment to run from the Time (hh:mm) lists.
3. Select the day you want deployment to run from the Day of the Month list (1 through 31).
4. Click OK on the Schedule Properties dialog box.

Editing a policy monitor

To edit an existing policy monitor, complete the following steps.
1. Select Monitor > Policy Monitor.
2. Select the policy you want to edit in the Monitors list and click Edit.
3. Change the user-defined name for the policy in the Name field.
4. Change the description of the policy in the Description field.
5. To edit the policy monitor checks, repeat
966
Where the hour value is from 1 through 12, the minute value is from 00 through 59, and the
day or night value is AM or PM.
To finish configuring the policy monitor, return to
page 959.
Where the hour value is from 1 through 12, the minute value is from 00 through 59, and the
day or night value is AM or PM.
To finish configuring the policy monitor, return to
page 959.
The Policy Monitor dialog box displays.
The Edit Policy Monitor dialog box displays. The Edit Policy Monitor dialog box has the same
fields and components as the Add Policy Monitor dialog box.
The name must be unique. It cannot be over 64 characters, nor can the field be empty. It
cannot include asterisks.
The description cannot be over 128 characters. It cannot include asterisks.
page 959.
step 6 of "Adding a policy monitor"
step 6 of "Adding a policy monitor"
step 5 through step 9 of "Adding a policy monitor"
Brocade Network Advisor SAN User Manual
on
on
on
53-1002696-01