Removing A Host From Active Discovery; Rediscovering A Previously Discovered Fabric - Brocade Communications Systems StoreFabric SN6500B User Manual

4
Host discovery
4. Configure discovery authentication by choosing one of the following options:
5. Enter the port number in the Port field.
6. Enter your username in the User ID field.
7.
8. Click OK on the Edit Host Adapters dialog box.
9. Click Close on the Discover Host Adapters dialog box.

Removing a host from active discovery

If you decide you no longer want the Management application to discover and monitor a specific
host, you can delete it from active discovery. Deleting a host also deletes the host data on the
server (both system collected and user-defined data) except for user-assigned names for the device
port, device node, and device enclosure information.
To delete a host from active discovery, complete the following steps.
1. Select Discover > Host Adapters.
2. Select the host you want to delete from active discovery in the Discovered Hosts table.
3. Click Delete.
4. Click OK on the confirmation message.
5. Click Close on the Discover Host Adapters dialog box.

Rediscovering a previously discovered fabric

To return a host to active discovery, complete the following steps.
1. Select Discover > Host Adapters.
2. Select the host you want to return to active discovery in the Previously Discovered Addresses
3. Click Discover.
4. Click OK on the confirmation message.
66
•
To configure discovery with authentication, select the HTTPS from the Protocol list.
•
To configure discovery without authentication, select the HTTP from the Protocol list.
HCM agent default is 34568. CIM server HTTPS default is 5989. CIM server HTTP default is
5988.
HCM agent default is admin. Leave this field blank for the CIM server.
Enter your password Password field.
HCM agent default is password. Leave this field blank for the CIM server.
If an error occurs, a message displays. Click OK to close the error message and fix the problem.
The Discover Host Adapters dialog box displays.
The deleted host displays in the Previously Discovered Addresses table.
The Discover Host Adapters dialog box displays.
table.
The rediscovered host displays in the Discovered Hosts table.
Brocade Network Advisor SAN User Manual
53-1002696-01