Displaying End-To-End Monitor Pairs In A Real-Time Graph; Displaying End-To-End Monitor Pairs In A Historical Graph; Refreshing End-To-End Monitor Pairs; Deleting An End-To-End Monitor Pair - Brocade Communications Systems StoreFabric SN6500B User Manual

Displaying end-to-end monitor pairs in a real-time graph

To display an end-to-end monitor pair in a graph, complete the following steps.
1. Select Monitor > Performance > End-to-End Monitors.
2. Select one or more end-to-end monitor pairs you want to view from the Monitored Pairs table.
3. Click Real-Time Graph.

Displaying end-to-end monitor pairs in a historical graph

To display monitored pairs in a historical graph, data collection must be enabled for the selected
fabric or enabled SAN wide.
To display an end-to-end monitor pair in a graph, complete the following steps.
1. Select Monitor > Performance > End-to-End Monitors.
2. Select one or more end-to-end monitor pairs you want to view from the Monitored Pairs table.
3. Click Historical Graph.

Refreshing end-to-end monitor pairs

The Management application enables you to rewrite the end-to-end monitors (deleted through CLI
or an Element Manager) back to a device.
To refresh all end-to-end monitor pairs, complete the following steps.
1. Select Monitor > Performance > End-to-End Monitors.
2. Click Refresh.
3. Click OK.

Deleting an end-to-end monitor pair

To delete an end-to-end monitor pair, complete the following steps.
1. Select Monitor > Performance > End-to-End Monitors.
Brocade Network Advisor SAN User Manual
53-1002696-01
The Set End-to-End Monitor dialog box displays.
You can select up to 100 monitored pairs.
The Real Time Performance Graphs dialog box displays.
The Set End-to-End Monitor dialog box displays.
You can select up to 100 monitored pairs.
The Historical Performance Graph dialog box displays.
The Set End-to-End Monitor dialog box displays.
All end-to-end monitor pairs are rewritten back to any devices where the end-to-end monitor
pairs were deleted through CLI or an Element Manager.
The Set End-to-End Monitor dialog box displays.
SAN End-to-end monitoring
29
917