Viewing Zone Configuration Properties; Adding Zones To A Zone Configuration - Brocade Communications Systems StoreFabric SN6500B User Manual

21
Zoning configuration
7.
8. Click OK or Apply to save your changes.

Viewing zone configuration properties

1. Select Configure > Zoning > Fabric.
2. Click the Zone DB tab if that tab is not automatically displayed.
3. Select a fabric from the Potential Members list.
4. Right-click the zone configuration you want to review in the Zone Configurations list and select
5. Review the zone configuration properties.
6. Click OK to close the Zone Configuration Properties dialog box.

Adding zones to a zone configuration

1. Select Configure > Zoning > Fabric.
2. Click the Zone DB tab if that tab is not automatically displayed.
3. Select a fabric from the Zoning Scope list.
4. Select one or more zone configurations to which you want to add zones in the Zone
5. Select one or more zones to add to the zone configurations in the Zones list. (Press SHIFT or
6. Click the right arrow between the Zones list and the Zone Configurations list to add the zones
7.
728
Add zones to the zone configuration.
For step-by-step instructions, refer to
Any zones or zone configurations you have changed are saved in the zone database.
The Zoning dialog box displays.
Properties.
The Zone Configuration Properties dialog box displays.
The Zoning dialog box displays.
This identifies the target entity for all subsequent zoning actions and displays the zoning
database for the selected entity.
Configurations list. (Press SHIFT or CTRL and click each zone configuration name to select
more than one zone configuration.)
CTRL and click each zone name to select more than one zone.)
to the zone configurations.
Click OK or Apply to save your changes.
Any zones or zone configurations you have changed are saved in the zone database.
"Adding zones to a zone configuration"
Brocade Network Advisor SAN User Manual
on page 728.
53-1002696-01