Setting Up Advanced Event Filtering - Brocade Communications Systems StoreFabric SN6500B User Manual

Setting up advanced event filtering

To set up advanced event filtering on the selected events for a user, complete the following steps.
1. Select Server > Users.
2. Select a user in the Users list and click Edit.
3. Select the E-mail Notification Enable check box and click the Filter link.
4. Click Advanced.
5. Select the Start Date check box to display only the events that were logged after the specified
6. To include events in the event filter, complete the following steps.
Brocade Network Advisor SAN User Manual
53-1002696-01
The Users dialog box displays.
The Edit User dialog box displays.
The Define Filter dialog box displays.
The Advanced tab of the Define Filter dialog box, as shown in
FIGURE 420
Define Filter dialog box - Advanced tab
start date. The default start date and time is the current date and time.
a. Select the event type you want to include from the Event Category list.
All event types are listed in alphabetical order.
b. Select the event column for the event from the Event Column list.
All event columns are listed in alphabetical order.
c. Enter all or part of the event type value in the Value Contains field.
d. Click the right arrow button to move the event type to the Additional Filters - Include these
Events list.
Defining filters
Figure 420, displays.
32
977