Connectivity Map - Brocade Communications Systems StoreFabric SN6500B User Manual

•
•
•
•
•
Product List functions
•
•
•
•

Connectivity Map

The Connectivity Map, which displays in the upper right area of the main widow, is a grouped map
that shows physical and logical connectivity of SAN components, including discovered and
monitored devices and connections. These components display as icons in the Connectivity Map.
For a list of icons that display in the Connectivity Map, refer to the following tables:
•
•
•
FIGURE 88
The Management application displays all discovered fabrics in the Connectivity Map by default. To
display a discovered Host in the Connectivity Map, you must select the Host in the Product List. You
can only view one Host and physical and logical connections at a time.
Brocade Network Advisor SAN User Manual
53-1002696-01
Symbolic Name — Displays the symbolic name for the port.
TAG — Displays the tag number of the product.
Vendor — Displays the name of the product's vendor.
WWN — Displays the world wide name of the product or port.
Zone Alias — Displays the zone alias of the product or port.
Customize — Customize the Product list. For more information, refer to
customization" on page 257.
Sort — Click a column head to sort the list. Click a column head again to reverse the sort order.
Two-way selection — Select a device in the Product List and that device is highlighted on the
Topology Map and vice versa.
Table shortcut menus — Right-click a column header in the Product List to view the menu. For a
list of right-click menus, refer to
"SAN product icons" on page 248
"SAN group icons" on page 249
"Event icons" on page 251
Connectivity Map
"Customizing application tables"
9
SAN tab overview
"SAN Product List
on page 253.
243