Brocade Communications Systems StoreFabric SN6500B User Manual page 908

26
Port VLANs
10. Complete one of the following tasks:
11. Click the Select Classifiers button to launch the Select Classifier Groups dialog box, shown in
860
•
If you want to assign the interface to the VLAN as an untagged port, click Untag.
•
If you want to assign the interface to the VLAN as a tagged port, click Tag.
•
If you want to make the VLAN on the interface dual mode, assign that interface as tagged
and select the same interface and assign as untagged to another VLAN. Dual mode ports
can be added to any VLAN except for the default (VLAN 1).
NOTE
Check the release notes for your product to determine the VLAN support available on that
product.
Figure 385, where you can assign classifiers and rules for supported DCB platform-based
VLANs.
The Select Classifiers button is disabled by default. To enable the button, select a single row in
the Selected Ports list.
NOTE
You cannot assign classifiers and rules for Network OS products.
FIGURE 385
Select Classifier Groups dialog box
Brocade Network Advisor SAN User Manual
53-1002696-01