Defining An Event Filter; Call Home For Virtual Switches - Brocade Communications Systems StoreFabric SN6500B User Manual

7

Defining an event filter

3. Click the left arrow button.
4. Click OK.
5. Click OK to close the Call Home dialog box.

Defining an event filter

To define an event filter, complete the following steps.
1. Select Monitor > Event Notification > Call Home.
2. Click Add beneath the Call Home Event Filter list.
3. Enter a name for the filter in the Name field.
4. Enter a name for the description in the Description field.
5. Select the check box for the events you want to include in the filter in the Available Call Home
6. Click OK on the Call Home Event Filter dialog box.
7.

Call Home for virtual switches

For virtual switches, there are two types of Call Home events:
•
•
184
A confirmation message displays.
All devices assigned to the selected Call Home center display in the Products List. Any assigned
filters are also removed.
The Call Home dialog box displays.
The Call Home Event Filter dialog box displays.
Event Types list.
To exclude the event, clear the check box. By default, all check boxes are selected during a new
installation. Click Select All to select all event types in the list or select Unselect All to clear the
selected event types in the list. For more information about Call Home events, refer to
Appendix B, "Call Home Event
The Available Call Home Event Types list displays the following information:
•
Description—The description of the event.
•
Type—The type of firmware for the selected event.
•
FRU Code/Event Type—The field-replaceable unit (FRU) code and event type for the event.
•
Severity—The severity of the event.
•
Event Reason Code—The event reason code of the event.
The event filter name and the description are displayed in the Call Home dialog box.
To assign event filters to a Call Home center or a device, refer to
Call Home center" on page 185 or
Click OK to close the Call Home dialog box.
FRU-based Call Home events, which are triggered at the chassis level.
Port-based Call Home events, which are triggered for each virtual switch.
Tables".
"Assigning an event filter to a device"
"Assigning an event filter to a
on page 185.
Brocade Network Advisor SAN User Manual
53-1002696-01