Launching The Smc On Linux; Services Tab; Monitoring And Managing Management; Application Services - Brocade Communications Systems StoreFabric SN6500B User Manual

11

Services tab

Launching the SMC on Linux

NOTE
The Server Management Console is a graphical user interface and should be launched from the
XConsole on Linux systems.
Perform the following steps to launch the Server Management Console on Linux systems.
1. On the Management application server, go to the following directory:
2. Type the following at the command line:

Services tab

You must be logged in at the administrator (Windows systems) or root (UNIX systems) level to stop,
start, and restart the Management application services. Stopping and restarting the Management
application services causes clients connected to the server to lose connection, and they must
re-log in to the server.
Monitoring and managing Management application services
To monitor the status of the Management application services, complete the following steps.
1. Launch the Server Management Console.
2. Click the Services tab
290
Install_Directory/bin
./smc
OR
sh smc
(Figure
FIGURE 104
Services tab
104).
Brocade Network Advisor SAN User Manual
53-1002696-01