Removing An Option From A Device's Shortcut Menu; Microsoft System Center Operations Manager (Scom) Plug-In - Brocade Communications Systems StoreFabric SN6500B User Manual

Removing an option from a device's shortcut menu

You can remove a tool that displays on a device's shortcut menu.
To remove an option to the device's shortcut menu, complete the following steps.
1. Select Tools > Setup.
2. Click the Product Menu tab.
3. Select the menu item you want to remove in the Product Popup Menu Items table.
4. Click Remove.
5. Click OK to save your work and close the Setup Tools dialog box.

Microsoft System Center Operations Manager (SCOM) plug-in

NOTE
The System Center Operations Manager (SCOM) plug-in is only supported on Windows.
NOTE
The SCOM plug-in is only available on Professional Plus and Enterprise.
NOTE
You must have SCOM Management privileges to access the Plug-in for SCOM dialog box. For more
information about privileges, refer to
The SCOM plug-in allows fabric inventory information collected by the Management application to
be displayed on the Microsoft SCOM console. The SCOM plug-in uses the SCOM SDK services to
extend the SCOM console and present fabric inventory information. The SCOM plug-in serves
dynamic HTML pages to the SCOM console.
The SCOM console displays the folloiwng information:
•
•
•
The SCOM plug-in is supported on the following configurations:
•
•
Brocade Network Advisor SAN User Manual
53-1002696-01
The Setup Tools dialog box displays.
The Product Popup Menu Items table displays all configured menu options.
Fabric and switch details
-end monitor statistics
Events from the Management application when Critical events for switches in the fabric trigger
CallHome in the Management application
SCOM 2007 R2
Professional Plus and Enterprise Trial and Licensed version 11.0.0 and later

Removing an option from a device's shortcut menu

"User Privileges" on page 1097.
10
285