Finding A Zone Member In The Potential Member List; Finding Zones In A Zone Configuration; Finding A Zone Configuration Member In The Zones List - Brocade Communications Systems StoreFabric SN6500B User Manual

21
Zoning administration
6. Click Find > between the Potential Members list and the Zones list.

Finding a zone member in the potential member list

Use this procedure to locate a zone member in the Potential Members list on the Zone DB tab.
1. Select Configure > Zoning > Fabric.
2. Click the Zone DB tab if that tab is not automatically displayed.
3. Select a fabric from the Zoning Scope list.
4. Select the zone member in the Zones list that you want to find in the Potential Members list.
5. Click Find < between the Potential Members list and the Zones list.

Finding zones in a zone configuration

Use this procedure to locate all instances of a zone in the Zone Configurations list on the Zone DB
tab.
1. Select Configure > Zoning > Fabric.
2. Click the Zone DB tab if that tab is not automatically displayed.
3. Select a fabric from the Zoning Scope list.
4. Select the zone you want to find in the Zones list. (Press SHIFT or CTRL and click each zone to
5. Click Find > between the Zones list and the Zone Configurations list.

Finding a zone configuration member in the zones list

Use this procedure to locate a zone configuration member in the Zones list on the Zone DB tab.
1. Select Configure > Zoning > Fabric.
2. Click the Zone DB tab if that tab is not automatically displayed.
754
If the member is found, all instances of the zone member found are highlighted in the Zones
list.
The Zoning dialog box displays.
This identifies the target entity for all subsequent zoning actions and displays the zoning
database for the selected entity.
(Press SHIFT or CTRL and click each zone member to select more than one zone member.)
If the member is found, it is highlighted in the Potential Members list.
The Zoning dialog box displays.
This identifies the target entity for all subsequent zoning actions and displays the zoning
database for the selected entity.
select more than one zone.)
If the zone is found, all instances of the zone are highlighted in the Zone Configurations list.
The Zoning dialog box displays.
Brocade Network Advisor SAN User Manual
53-1002696-01